A Birtley CB130 standard duty steel cavity wall lintel for 130-145mm cavities with a 100mm outer and 100mm inner leaf. It suits the wider insulated cavities found on newer houses and extensions. Birtley galvanise their lintels after they're made, so cut edges and welds are protected too, and the polystyrene insulation is fitted at the factory to cut cold bridging over the opening.
- Length 1800mm
- For 130-145mm cavities, 100mm outer and inner leaf
- Safe working load 20kN (uniformly distributed)
- Nominal height 124mm
- Weighs about 18.0kg (10.0kg per metre)
- Mild steel S275JR, 65 micron hot-dip galvanised after fabrication
- Factory-fitted expanded polystyrene insulation
- Plaster key on the inner leaf
- 60-minute fire rating with a two-coat plaster finish
- Bed fully on mortar with at least 150mm end bearing; use with a cavity tray
- Not for point loads or concrete floors - ask us about a heavier duty lintel
- Made to BS EN 845-2
Reviews
Please log in to leave a Review.
please wait
added to basket
View basket